Nordost Blue Heaven +, Tonarmkabel The tonearm lead is one of the most critical audio cables in an analog system. The fragile nature of the signals it carries demands a purpose-built, low capacitance conduit, in order to maximize the authentic and natural musical reproduction that LPs offer.The Blue Heaven Tonearm Cable + uses a twisted pair cable design to create a left and right channel, which are individually shielded in order to eliminate inter-channel crosstalk. It also employs a separately shielded, silver-plated bond wire, wrapped in Micro Mono-Filament, which runs alongside the left and right channel to help minimize noise from the line. However, the most exciting aspect of this cable design is its revolutionary grounding solution. Nordost has introduced detachable, silver-plated ground whips, complete with Micro Mono-Filament technology, to further enhance this groundbreaking cable. These ground whips completely eliminate any noise that could be introduced during signal transfer, regardless of the unique construction of the components found in each individual sound system. Technical Details Insulation: Fluorinated Ethylene Propylene (FEP) Conductors: 4 x 28 AWG Construction: 2 Twisted pairs individually shielded Material: Silver plated 99.9999% OFC Solid Core Conductors Capacitance: 15.13pF/ft (49.5pF/m) Velocity of Propagation: 74% Overall Shield Coverage: 97% Bond / Grounding Whips: 24 AWG silver-plated, stranded OFC, Micro Mono-Filament design. Termination: MoonGlo® Straight or 90० low-mass 5-pin Din, RCA, or XLR connectors. Whips and bond wire terminated with gold-plated 5mm spades.

Nordost Heimdall 2+, Tonarmkabel The tonearm lead is one of the most critical audio cables in an analog system. As such, it demands a purpose-built, low capacitance conduit, in order to maximize the authentic and natural musical reproduction that LPs offer.The Heimdall 2+ Tonearm Cable is virtually noiseless, with rapid transmission speed and the highest bandwidth capabilities, thanks to its twisted pair design, individualized shielding, and Nordost’s proprietary Micro Mono-Filament technology. It also employs a separately shielded, silver-plated bond wire, wrapped in Micro Mono-Filament, to minimize noise from the line. However, the most exciting aspect of this cable design is its revolutionary grounding solution. Nordost has introduced detachable ground whips, complete with Micro Mono-Filament technology, that further eliminate any noise that could be introduced during signal transfer, regardless of the unique construction of the components found in each individual sound system. Technical Details Insulation: Fluorinated Ethylene Propylene (FEP) Conductors: 4 x 28 AWG Construction: 2 Twisted pairs individually shielded. Mechanically tuned lay and lengths. Micro Mono-Filament design. Material: Silver plated 99.99999% OFC Solid Core Conductors Capacitance: 11.46pF/ft (37.5pF/m) Velocity of Propagation: 76% Overall Shield Coverage: 97% Bond / Grounding Whips: 24 AWG silver-plated, stranded OFC, Micro Mono-Filament design. Terminations: MoonGlo® Straight or 90° low-mass 5-pin din, RCA or XLR. Termination (Whips & Bond): Whips & bond wire terminated w/ gold-plated 5mm spades.

Nordost Frey 2+, Tonarmkabel The tonearm lead is one of the most critical audio cables in an analog system. As such, it demands a purpose-built, low capacitance conduit, in order to maximize the authentic and natural musical reproduction that LPs offer. The Frey 2+ Tonearm Cable is virtually noiseless, with rapid transmission speed and the highest bandwidth capabilities, thanks to its twisted pair design, individualized shielding, and Nordost’s proprietary Dual Mono-Filament technology. It also employs a separately shielded, silver-plated bond wire, wrapped in Micro Mono-Filament, to minimize noise from the line. However, the most exciting aspect of this cable design is its revolutionary grounding solution. Nordost has introduced detachable ground whips, complete with Micro Mono-Filament technology, that further eliminate any noise that could be introduced during signal transfer, regardless of the unique construction of the components found in each individual sound system. Technical Details Insulation: Fluorinated Ethylene Propylene (FEP) Conductors: 4x26 AWG Construction: 2 Twisted pairs individually shielded. Mechanically tuned lay and lengths. Dual Mono-Filament design. Material: Silver plated 99.99999% OFC Solid Core Conductors Capacitance: 11.77pF/ft (38.5pF/m) Velocity of Propagation: 76% Overall Shield Coverage: 98% Bond / Grounding Whips: 24 AWG silver-plated, stranded OFC, Micro Mono-Filament design. Terminations: MoonGlo® Straight or 90° low-mass 5-pin Din, RCA, or XLR connectors. Terminations (Whips & Bond): Whips and bond wire terminated with gold-plated 5mm spades.

Nordost Tyr 2+, Tonarmkabel The tonearm lead is one of the most critical audio cables in an analog system. As such, it demands a purpose-built, low capacitance conduit, in order to maximize the authentic and natural musical reproduction that LPs offer. The Tyr 2+ Tonearm Cable is virtually noiseless, with rapid transmission speed and the highest bandwidth capabilities, thanks to its twisted pair design, individualized shielding, and Nordost’s proprietary Dual Mono-Filament technology. It also employs a separately shielded, silver-plated bond wire, wrapped in Micro Mono-Filament, to minimize noise from the line. However, the most exciting aspect of this cable design is its revolutionary grounding solution. Nordost has introduced detachable ground whips, complete with Micro Mono-Filament technology, that further eliminate any noise that could be introduced during signal transfer, regardless of the unique construction of the components found in each individual sound system. Technical Details Insulation: Fluorinated Ethylene Propylene (FEP) Conductors: 4x25 AWG Construction: 2 Twisted pairs individually shielded. Mechanically tuned lay and lengths. Dual Mono-Filament design. Material: Silver plated 99.99999% OFC Solid Core Conductors Capacitance: 11.12pF/ft (36.36pF/m) Velocity of Propagation: 78% Overall Shield Coverage: 98% Bond / Grounding Whips: 24 AWG silver-plated, stranded OFC, Micro Mono-Filament design. Terminations: MoonGlo® Straight or 90० low-mass 5-pin Din, RCA, or XLR connectors. Whips and bond wire terminated with gold-plated 5mm spades.

Pro-Ject 5P-CC, Phonokabel mit Masseleitung Phonokabel mit Masseleitung, 2x RCA/Cinch-Stecker + 1x gerader, 5-poliger Tonarmstecker.

Pro-Ject Phono RCA-E, Phonokabel / NF-Kabel mit Masseleitung Phonokabel mit Masseleitung, 2x RCA/Cinch-Stecker beidseitig. Anschlussmarkierung. Markiertes Ende wird bei Einsatz mit Plattenspieler am Phono-Vorverstärker oder an den Phono-Eingängen des Steuergerätes (Voll-, Vorverstärker oder AV-Prozessor) angeschlossen.

Ortofon 6NX TSW-1010, Tonarm-Anschlusskabel Die schwachen Signale des Tonabnehmers sind sehr empfindlich gegenüber elektromagnetisch induziertem Rauschen aus der Außenwelt. Dinge wie Mobiltelefone und Haushaltsgeräte sind eine Herausforderung für das Tonarmkabel. Mit diesem Schwerpunkt haben die Ortofon-Ingenieure ein Kabel mit 7 Adern 5N/6N OFC (Oxygen Free Copper) hergestellt, wobei die Adern für eine optimale Abschirmung gegen elektrische Störstrahlungen von einer dichten Abschirmung umgeben sind. Technische Daten Leitermaterialien: Kupfer-Hybrid-Aufbau bestehend aus 1. sauerstofffreiem 6N-Reinkupfer (OFC 99,9999%), 2. sauerstofffreiem 5N-Reinkupfer (OFC 99,999%) Konfektionierung: RCA-/Cinch-Stecker mit rhodinierten Kontakten, 5-poliger Tonarm-DIN-Stecker mit vergoldeten Kontakten, Massekabel mit Kabelschuh Kapazität: 85pF Außendurchmesser: 10mm Länge: ca. 120cm

Aufbau: 20x 0,05 OFC-Feinkupfer mit echter Naturseidenumspannung. Außendurchmesser 0,5mm. Hochflexibel! Auch andere Längen auf Anfrage lieferbar!